The 10 clauses that decide whether your OEM contract protects you or the factory
Most OEM disputes were written into the contract on day one. Vague quality wording, no mould clause, no lead-time penalty — these are the gaps buyers find only when a container is late or a batch fails. These ten clauses are what we sign ourselves, and what you should insist on with any supplier.
The clauses, in the order they matter
- Quality standard and the sealed sample. Name the reference (e.g. GB/T or your market's standard) and physically seal a sample of the approved product — both parties keep one. Disputes get resolved against the sealed sample, not against memory.
- Batch-to-sample consistency. Bulk goods must match the sealed sample within stated tolerances (colour, viscosity, pH, fragrance). State the acceptable tolerance numbers.
- Price validity and raw-material triggers. A price should be locked for a stated period (usually 3–6 months). If it must move, the clause should name the trigger (e.g. a specific raw material index moving more than 10%), not "market conditions".
- Lead time and late-delivery penalty. State the lead time from deposit and artwork approval, and a penalty of 0.5%–1% of order value per week of delay, capped. A lead time with no penalty is a wish, not a term.
- Mould and tooling ownership. If you pay for a mould, you own it — the contract must say it is yours, is marked, and is released to you or your next supplier within 15 days of written request.
- Payment terms and the inspection gate. 30% deposit, 70% before shipment is standard — but tie the final payment to a passed pre-shipment inspection (by you or a third party), not to a calendar date.
- Formula confidentiality and IP. A formula developed for you is yours; a factory's stock formula stays theirs. Write down which kind you are buying, and prohibit sale of your custom formula or a confusingly similar product to named competitors.
- Defect handling and recall cost. State the defect threshold (commonly 0.5%–1%), the remedy (replacement, credit or refund), and who pays freight and recall cost for a systemic defect. Silence on this clause is the most expensive gap of all.
- Trademark and compliance responsibility. You warrant your brand does not infringe; the factory warrants the formula is compliant and the filing documents are genuine. Keep these separate so one party's failure does not contaminate the other's position.
- Dispute resolution. Name the forum before there is a dispute — CIETAC arbitration is the common practical choice for cross-border cosmetics orders.
Clauses that sound protective but are not
| Wording to be careful with | Why it fails you | What to write instead |
|---|---|---|
| "Quality: export standard" | No such standard exists; it means nothing in a dispute | Name the standard and seal the sample |
| "Lead time: about 30 days" | "About" has no legal force | Exact days from a defined trigger, with a penalty |
| "Defects handled by mutual agreement" | Means: negotiate when you have no leverage | Threshold, remedy, cost allocation, deadline |
| Verbal exclusivity promises | Unenforceable, and forgotten when a bigger buyer arrives | Written exclusivity by SKU, territory and duration |
What a first order should actually contain
For a first order you do not need a 30-page agreement — you need the ten clauses above in two or three pages, in English and Chinese, signed and stamped. A factory that hesitates at a written quality standard, a mould ownership line or a late-delivery penalty is telling you how the relationship will go. We sign this structure as standard; if any clause needs adapting to your market's rules, we adjust it before the deposit, not after.
What buyers usually ask next
Do I need a Chinese-language contract?
Have both. If there is a dispute in China, the Chinese text usually governs unless the contract says otherwise. We provide bilingual contracts with both texts stated as equally valid, so you can review the Chinese with your own advisor.
Who owns the mould if the factory orders it from a mould shop?
You do, if you paid for it — but only if the contract says so. The clause should also cover moulds the factory commissions on your behalf, and require release within a stated period after written request.
What defect rate is normal to accept?
AQL-based inspection typically accepts up to 0.5%–1% minor defects and zero critical defects (leakage, contamination, wrong bulk). Anything systemic — a whole batch off-spec — should be replacement or refund at the factory's cost, including freight.
Is a deposit of 30% negotiable?
Sometimes for repeat orders, rarely for a first one. What matters more than the percentage is the trigger for the final payment — tie it to a passed pre-shipment inspection rather than a date, and the terms work in your favour.
Related guides
Need a quote or a sample?
Tel / WeChat: +86 156 2222 0825 · Huadu District, Guangzhou · video factory tour and worldwide sampling available.